Dilin 449 Underwater Operation/Anticorrosive Coatings

1. It can be coated and cured on the substrate submerged in water.
2, a single coat can achieve the expectation of long-term protection.
3. It can be compatible with cathodic protection and anticorrosion system.
4. The coating is resistant to seawater, abrasion and corrosion.

Dilin 449 is a protective coating for coating and maintenance of offshore platforms and splash areas; It is suitable for external wall protection of various buried pipelines. Suitable for wet sand blasting or ultra-high pressure water (UHPWW) cleaning surface coating (whether wet or dry).

1. Density: 1.5 kg/L (12.1 lb/US gallon)
2. Volume solid content: 98 2%
3. VOC (ex-factory value): the maximum value is 122g/kg, 200g/L (1.7lb/gallon).
4. Recommended dry film thickness: 150-1000 microns (6.0-40.0 mils) depending on the requirements of the coating system.
5. Theoretical coating rate: 4.3m/L for 200 microns (170ft/US gallon for 8.0mil).
6. Dry film thickness: 200 microns (8.0 mils), 4.3 meters/liter (170 feet/US gallon); 500 microns (20.0 mils), 1.7 meters/liter (68 feet/US gallon)